Vehicles
Sections
44 not categorized PORSCHE 356 NEW WHEELCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2001-05 (includes uncategorized and accessory items) FVD123014ATK K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD116909 Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. They offer a silky-smooth release, superb drivability, quicker acceleration and can handle more torque (486 ft/lbs. / 660 nm max.). This kit includes a clutch disc with torsion springs that function as a vibration damper between engine and gearbox. That allows for an effortless pedal release when engaging each gear. The lightweight flywheel allows the engine to rev more freely which means quicker acceleration, faster shifts and getting into the power band more quickly. This kit is suited for daily use / light track...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 1994-98
From $2,636.70
Make a selection 99918200336 If you are planning to install new wheels new lug nuts are the finishing detail that is necessary. This lug nut is quality made in Germany and is the perfect replacement for your worn originals. Head length: 19 mm overall length: 32 mm material: lightweight aluminum alloy includes proper Porsche wheel nut rounded shoulder / ball seat made in Germany. Sold individually. View/Change Diagram
From $8.75
Make a selection FVD123025 K24/26 race turbo (up to 700 hp) General Fitment911 TURBO/GT2 2001-05
$5,022.33
Make a selection FVD123041ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection FVD123026AT K24/26 exchange turbo (only OEM k24 exchange accepted) General Fitment911 TURBO/GT2 2001-05
$2,506.75
Make a selection FVD347088 The momo prototipo is a classic wheel using a combination of the finest modern materials giving it the perfect blend of old and new. Made from top grain leather with white stitching, black cut-out spokes and includes a momo horn button. Momo prototipo is the excellent choice for those wishing to retain the character of their vehicle while refreshing the interior. Style: rally color: black material: leather spoke finish: black horn: matte black with momo horn button diameter: 13.78 in (350 mm) rim diameter: 1.29 in (33 mm) dish: 1.4 inch (37 mm) weight: 2.86 lbs. (1.3 kg) please note: this kit is only for cars without an airbag. Vehicle-specific hub adapter required.
$297.00
Make a selection FVD3511M18002A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,394.50
Make a selection FVD3522P18056A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection FVD3522P18027A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection FVD123025AT K24/26 exchange turbo (only OEM k24 exchange accepted) General Fitment911 TURBO/GT2 2001-05
$2,506.75
Make a selection FVD364111955R01 The wheel can be fit without modifing the car. Like new
$565.57
Make a selection NLABRAKEKIT Includes all new wheel cylinders, shoes and hardware
$935.00
Make a selection M998077 The roll-around attachment will fit either of our 12" auto dolly. Once attached, you have unimpeded access to the wheel well areas (with the tires/wheels removed) and yet can still move your vehicle in any direction. A real boon to auto restoration projects, painting and body work. (now you don't have to disturb your masked-off doors to move the vehicle!) also facilitates an orderly shop or garage and makes sweeping & cleaning so much easier too! The roll-around attachment is just one of the new accessories that make the auto dolly useful in so many ways in your shop or garage. Sold as a set of two, four needed per car. General FitmentACCESSORY
$181.00
Make a selection NLARB1SETB 5-inch wheel set, with 15x4 5 spare, four new brake drums and hub conversion set for 356b
$17,594.50
Make a selection PCG90272110 Content: 5x double open-ended wrench (one each: 8x9, 10x11, 12x13, 14x15 and 17x19), 1x wheel nut wrench, 1x special wrench size 36, 1x combination pliers, 1x long screwdriver with holding function, 1x phillips screwdriver, 1x spark plug socket wrench, 1x spark plug ratchet wrench, 1x brass brush, 1x feeler gauge, 1x v-belt, 1x cleaning cloth the decision to develop the tool bag for the 912 was the Porsche classic response to numerous customer enquiries at various Porsche classic events  the experts at Porsche classic are also responsible for the unique appearance of the tool bag, which is characterized by the combination of leather and corduroy this fabric was once used for the central section of the seats...(choose a part on the right to read more)
From $567.74
Make a selection VR996TTTDSTG3 With a strong background in Porsche 996 turbo product development and tuning behind us, it is time to take the factory 996 turbochargers to the next level. Now available is our GT2 style billet compressor wheel upgrade for the k16 or k24 turbos. Where the 16g and 18g turbo upgrade were the norm of years past, new technology, machining processes, and r&d has made available these billet compressor wheels to produce more power, with better throttle response, and longer term reliability than the mitsubishi hybrid wheels. In addition to the compressor wheel upgrade, we update the factory wastegates to a turbosmart adjustable wastegate actuator. This comes with a 1.5 - 2.0bar spring setting for serious horsepower car...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05
$4,725.00
Make a selection VR996TTTDSTG2 With a strong background in Porsche 996 turbo product development and tuning behind us, it is time to take the factory 996 turbochargers to the next level. Now available is our GT2 style billet compressor wheel upgrade for the k16 or k24 turbos. Where the 16g and 18g turbo upgrade were the norm of years past, new technology, machining processes, and r&d has made available these billet compressor wheels to produce more power, with better throttle response, and longer term reliability than the mitsubishi hybrid wheels. In addition to the compressor wheel upgrade, we update the factory wastegates to a turbosmart adjustable wastegate actuator. You can achieve the common 1.0bar setting or have it adjusted to your ne...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05
$3,780.00
Make a selection GR6036 Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. General FitmentALL
$52.95
Make a selection FVD1169901 Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. The kit includes a disc with a rigid hub and organic friction material. It has superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and can transmit higher torque (583 ft/lbs. / 790 nm max.). Please note that this kit has an aggressive start performance (release window is very small), we do not recommend this kit for lightly modified or stock street cars. Clutch kit includes: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubrican...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98
From $1,819.45
Make a selection 64468010SET 5 inch, with hubs and knock-offs silver painted new production from Germany 64468010
$14,300.00
Make a selection FVD123047 FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$6,413.00
Make a selection AA914501 This is a perfect fit kit to reconstruct the complete right rear inner fender well battery tray suspension console engine shelf area that every Porsche 914 suffers from the battery leaking acid. i am always asked about reconstructing the rusted away battery area, referred to some as the "914 hell hole" (hate that term applied to a 914 lol) so have finally decided to list the whole kit on e bay so you can see how the parts interact. (support was painted for contrast buy you will get a brand new one) moderately installed by the home hobbyist or welder/body man, it will return your car to its original configuration and strength. all parts manufactured by us in michigan based on original factory nos parts for ...(choose a part on the right to read more)
$1,100.00
Make a selection 1501415095R01 Like new
$9.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |